AdsBridge + MaxBounty + BingAds anyone?

[gnr5]

Hello, has anyone being succesful to configure this setup? I'm getting the clicks and views recorded correctly but I'm not getting the conversions tracked.

Where should I start looking?

Thanks!

 

[razrus5]

Good combination. Have not tried adsbridge for tracking yet. I have had mixed results with initial tests on offers for search on BingAds. My basic rules is watch your impressions. Over 10k and certain amount of clicks on the offer. May need to optimize the ad a little more. Sometimes you can try a different offer. To compare. Setup a budget and adjust accordingly to your data.

 

[adirsab]

In AdsBridge go to> Campaigns> Tracking Pixel - copy the S2S postback.
go to your profile at Maxbounty>Default Callback Code: paste the S2S postback there.
change YOUR_NETWORK_TOKEN to #S2#. your done.

 

[Nick AdsBridge]

Hello, has anyone being succesful to configure this setup? I'm getting the clicks and views recorded correctly but I'm not getting the conversions tracked.

Where should I start looking?

Thanks!

Hey there, gnr5 !

Thank you for your question!

adirsab is totally correct. Thank you for being so active
You need to modify our postback for tracking.

Let me explain on the example of my postback.

http://yawj.adsb4all.com/trackpixel/track?tid=YOUR_NETWORK_TOKEN&amt=REPLACE&txid=REPLACE&cdata=YOUR _CUSTOM_DATA

As you can see, there are four variables in it.
tid stands for click ID
amt stands dynamic value of payout
txid - transaction ID for CPS offers ( set it if you want to track multiple conversions from one click ID)
cdata - custom data to pass to traffic source.

If you have CPA offer - your postback should look like:
http://yawj.adsb4all.com/trackpixel/track?tid=#S1#&amt=#RATE#

But it's only the postback part. To track conversions properly you need to use s1 as a tracking token in AdsBrdige:

Feel free to ask if there will be more questions.

 

[hakim merzak]

hello sir adirsab,
this method is valid with cpagrip and adsbridge?
thank you

 

[adirsab]

Hey,
Don't know about CPAGrip. You can ask your AM about it.
Cheers

 

[hakim merzak]

thank you for your reply

 

[matelo]

Hey there, gnr5 !

Thank you for your question!

adirsab is totally correct. Thank you for being so active
You need to modify our postback for tracking.

Let me explain on the example of my postback.

http://yawj.adsb4all.com/trackpixel/track?tid=YOUR_NETWORK_TOKEN&amt=REPLACE&txid=REPLACE&cdata=YOUR _CUSTOM_DATA

As you can see, there are four variables in it.
tid stands for click ID
amt stands dynamic value of payout
txid - transaction ID for CPS offers ( set it if you want to track multiple conversions from one click ID)
cdata - custom data to pass to traffic source.

If you have CPA offer - your postback should look like:
http://yawj.adsb4all.com/trackpixel/track?tid=#S1#&amt=#RATE#

But it's only the postback part. To track conversions properly you need to use s1 as a tracking token in AdsBrdige:
View attachment 5010

Feel free to ask if there will be more questions.

Hi Nick I'm trying to set up my first campaign on Adsbridge but I'm a little bit confused (I've never used a tracker before).

I'm using Bing Ads + Maxbounty and I'd like to know which keywords are converting.

- I create the "affiliate network" and I pasted this http://qwnbj.ab4all.com/trackpixel/track?tid=#S1#&amt=#RATE# to Maxbounty

- Traffic source. I created the traffic source (Bing) and I added a few tokens

- I created the campaign, I left the "3-RD PARTY PIXEL " empty, is it correct? as for the path I added the landing, I don't understand if I have to add also the offer because it says "redirect to" and I want the user to stop on the landing.

- As for the offer I added the affiliate link , affiliate network and payout

- Should I add any parameters on the Maxbbounty affiliate link?

thank you in advance